Monday, January 03, 2011This bench is custom designed to test 84 fuel pump modules (or fuel delivery modules) simultaneously with various fuels in an explosion proof environment. Tests can be performed on groups of six across fourteen different baths with independant fuels and temperatures. Operation is unattended and designed for thousands of hours between tests.
Friday, August 06, 2010This machine breaks in and calibrates gasoline fuel injectors in a production environment. A locking reject chute requires operators to properly isolate unconforming material before another part can be tested or removed from a test fixture.
Saturday, December 05, 2009
This fuel system testing machine is designed to test a production diesel fuel pump.
Tuesday, June 02, 2009
We have made several versions of fuel injector nozzle machines for diesel fuel injectors. These machines are mainly for production use and can be configured in a variety of ways, such as single or multiple heads as well as automatic loading.
Monday, June 01, 2009
We have Built all types of machines to endurance test diesel fuel injectors, pumps and engine brakes at various operating pressures and rates. They are intended to run for extended periods of time unattended.
Tuesday, March 10, 2009
This fuel system testing machine is designed to operate a common rail diesel pump at low pressures for the purpose of evaluating debris in a warranty return environment.
Friday, November 28, 2008
This fuel system testing machine was designed to test a complete Diesel common rail fuel system, which consists of the pump, rail and injectors.
Friday, October 20, 2006
This fuel system testing machine has two temperature controlled baths that hold fuel for testing gasoline fuel tank pump modules.
Friday, March 31, 2006
This fuel system testing machine is designed for testing a complete common rail fuel system. It accommodates a test frame with the entire fuel system mounted to it in engine orientation
Friday, August 05, 2005
This fuel system testing machine is designed to calibrate and test a production diesel fuel pump with the aid of an operator. The pump can be configured with a variety of options which the machine figures out based on a product ID.
Monday, August 01, 2005
This machine performs a production end of line test on a direct injection gasoline system pressure control valve. Features such as valve opening response, valve closing response, proof pressure and other pressure control characteristics are being measured.
Saturday, January 01, 2005
This particular fuel system testing machine was designed to assemble and test a complete diesel fuel injector all in a self-contained package with a small footprint.
Sunday, August 01, 2004
This fuel system testing machine was designed and built to perform a full functional test on an electronic common rail diesel fuel pump. The bench completely maps the pump characteristics as well as the individual pumping elements across the complete operational range.
Tuesday, June 01, 2004
These fuel system testing machines, often referred to as calibrators are typical of our manual loaded style EUI or MUI fuel injector test machine. These machines are for production use and measure discharge volume, injection timing, peak injection pressure and body leakage on mechanically actuated Diesel fuel injectors.
Tuesday, June 01, 2004
This fuel system testing machine is typical of our manual loaded style HEUI fuel injector test machine. These machines are for production use and measure discharge volume, injection reaction time, and seat leakage. Some machines are designed to accommodate top and body fed HEUI products.
Tuesday, July 01, 2003
This fuel system testing machine is targeted towards new hydraulic product development such as fuel injectors, brakes and actuators. The system is comprised of a hydraulic power unit and a test station than can be changed out in a quick fashion.
Saturday, March 01, 2003
This fuel system testing machine performs a precision assembly of a fuel injector barrel and plunger and then performs a gauging operation to verify that a dimension is correct.
To obtain more information on how MCM can serve you with world-class engineering and design of advanced test machinery, please call or email us.
Wednesday, January 30, 2013Reducing Inertial Noise for Injector Testing
Wednesday, July 25, 2012
Wednesday, February 22, 2012We’ve been reading a lot of press concerning U.S. manufacturing companies “reshoring” and bringing manufacturing jobs back to the United States. The companies reportedly involved include household names like Ford Motor, Buck Knives, Master Lock, and more.